💻8.0 - Wraith ARS 2X (Wraith Advanced Radar System)

A guide on how to operate Wraith Advanced Radar System

How to turn on the radar

STEP 1

Use F11 to open the Remote for the radar

STEP 2

Click the Toggle Display button on the remote and then click the PWR button on the Radar box to turn on the radar instruments

STEP 3

Click the XMIT on your preferred radar (Front/Back) to turn it into transmit mode then click either SAME or OPP to choose a direction for that radar

Changing the Radar Settings

• Fast Target (FAS)

  • If turned on, then the fastest target will be displayed

• Same Lane Sensitivity (SL SEn)

  • This will change the sensitivity of the same-lane radar, or the range. The higher the number the longer the range will be

• Opposite Lane Sensitivity (OP SEn)

  • Same as the Same Lane Sensitivity option, but for radars who are aimed at the opposite lane

• Beep Volume (bEE P)

  • This will change the volume of the beeps when clicking on buttons, the lower the number the lower the volume.

• Voice Volume (VOI CE)

  • This will change the volume of the voice announcer when a fast speed is captured, the lower the number the lower the volume

• Plate Audio (PLt AUd)

  • This will change the volume of the announcer that plays when a BOLO’d plate is captured by the radar, the lower the number the lower the volume

• Unit Type (Uni tS)

  • Changes the unit that the radar captures in, USA is for MPH and iNt is for KMH

• Fast Lock (FAS Loc)

  • Changes whether the radar will lock a speed if the speed is faster than the fast speed

• Fast Speed (FAS SPd)

  • Sets the minimum speed for the radar to lock a fast speed, in increments of 5

Default Keybinds

You are able to find each keybind by going to your GTA Settings -> Keybinds -> FiveM. There, it will show each keybind and what they do. You are able to change them like normal GTA keybinds. We recommend you changing to the keys below

• F11 - Opens the Radar Controller

• FX - Toggles the radar key locks, which disables all keybindings for the radar

• NUMPAD 8 - Toggles the lock for the front radar

• NUMPAD 5 - Toggles the lock for the rear radar

• NUMPAD 9 - Toggles the lock for the front ALPR

• NUMPAD 6 - Toggles the lock for the rear ALPR

• ESC - Closes radar controller

A video also created by the author showcasing every feature in a video format (15m)

Using the ALPR and Setting Bolo Plates (WORK IN PROGRESS)

Please use this manual for in detail instructions from the creators of Wraith ARS 2X https://wolfknight98.github.io/wk_wars2x_web/manual.pdf